Description
-
The dimensions of products are maintained within the tolerances
-
High-speed production is achieved.
Specification
AH-20 | ||||
---|---|---|---|---|
Capacity | ton | 20 | ||
Capacity generating point | mm | 1.6 | ||
Stroke of slide | mm | 20 | 30 | 50 |
Stroke per minute | spm | 600 | 150 | |
Die height | mm | 215 | 210 | 200 |
Slide adjustment | mm | 50 | ||
Slide lower area | mm | 260x190 | ||
Shank hole | mm | 38.1Øx80 | ||
Bolster area | mm | 500x300 | ||
Bolster thickness | mm | 75 | ||
Bed opening | mm | 270x205 | ||
Back opening | mm | 180 | ||
Height from floor to bolster | mm | 800 | ||
Motor | HP | 3x4p | ||
Weight [Approx.] | mm | 2200 |
AHS-20 | |||||
---|---|---|---|---|---|
Capacity | ton | 20 | |||
Capacity generating point | mm | 1.6 | |||
Stroke of slide | mm | 20 | 30 | 50 | 80 |
Stroke per minute | spm | 500 | 150 | ||
Die height | mm | 215 | 210 | 200 | 185 |
Slide adjustment | mm | 50 | 30 | ||
Slide lower area | mm | 260x190 | |||
Shank hole | mm | 38.1Øx80 | |||
Bolster area | mm | 500x300 | |||
Bolster thickness | mm | 75 | |||
Bed opening | mm | 270x205 | |||
Back opening | mm | 180 | |||
Height from floor to bolster | mm | 800 | |||
Motor | HP | 3x4p | |||
Weight [Approx.] | mm | 2200 |
AH-40 | ||||
---|---|---|---|---|
Capacity | ton | 40 | ||
Capacity generating point | mm | 1.6 | ||
Stroke of slide | mm | 20 | 30 | 50 |
Stroke per minute | spm | 500 | 150 | |
Die height | mm | 260 | 255 | 245 |
Slide adjustment | mm | 50 | ||
Slide lower area | mm | 340x260 | ||
Shank hole | mm | 50.8Øx75 | ||
Bolster area | mm | 700x450 | ||
Bolster thickness | mm | 90 | ||
Bed opening | mm | 360x295 | ||
Back opening | mm | 380 | ||
Height from floor to bolster | mm | 850 | ||
Motor | HP | 5x4p | 3x4p | |
Weight [Approx.] | mm | 2200 |
AHS-40 | |||||
---|---|---|---|---|---|
Capacity | ton | 40 | |||
Capacity generating point | mm | 1.6 | |||
Stroke of slide | mm | 20 | 30 | 50 | 80 |
Stroke per minute | spm | 400 | 150 | ||
Die height | mm | 260 | 255 | 245 | 240 |
Slide adjustment | mm | 50 | 45 | ||
Slide lower area | mm | 340x260 | |||
Shank hole | mm | 50.8Øx75 | |||
Bolster area | mm | 700x450 | |||
Bolster thickness | mm | 90 | |||
Bed opening | mm | 360x295 | |||
Back opening | mm | 380 | |||
Height from floor to bolster | mm | 850 | |||
Motor | HP | 5x4p | 5x6p | ||
Weight [Approx.] | mm | 3200 |