Can’t find your product here ?

HIGH EFFICIENCY PRECISION PRESS
SC1 25~250

Description

  • Wet Clutch and Brake

    High transmission wet clutch / brake

    • High performance and efficiency oil bathed clutch / brake lining provide lasting service life time, without the worry of being worn out.
    • Low inertia / High torque multi-disk design, ensuring more improved sensitivity on start and brake.
    • Unique design allows faster intermitten operation, good for synchronized operation with robot arm.
    • Low noise, zero pollution, fully complied to the future requirement of environment protection.
  • Slide guide structure

    • The square copper liner and lubrication system keeps the slide in very high precision.
    • Slide side thrust to be sustained direct by frame.
    • The slide liner is made of phosphor bronze, being smooth and easy to keep precision. Prolong die life and elevation the high quality of the products.
  • Hydraulic overload protection system

    • When the press is operating under overloading, the oil escapes throung the metal seal and the press is brought to a stop instantly.
    • It's function is to make instant emergent stop when the press is operating under overloading (It's inductive reaction is within 1/100 sec.) At this time, The press shoule be turned to the upper dead center and will return to normal operating after the overloading is relieved.
  • Structural design

    It is smaller in size than the conventional press, but more effective in space occupation.

  • Angular deflection

    The frame steel plate has high-tensile stress and minimal angular deflection.
    This feature to reduce punching deformation maintains precise punching position, and prolongs the life of the dies.

Specification

SC1-25
Model (S) (1) (2)
Capacity ton 25
Tonnage rating point (above B.D.C.) mm 2.3 2.5
Stroke length mm 30 50 80
Stroke per minute Standard spm 90 120
Variable 90 ~ 220 60 ~ 140 60 ~ 120
Allowable intermittent spm 48 74
Die height, slide to bolster mm 200 220
Slide adjustment mm 50
Slide area (a1xb1) mm 350 × 250
Bolster area (a2xb3) mm 700 × 320
Bolster thickness mm 85
Frame gap (b2) mm 170
Frame inside measurement (a3) mm 420
Bolster surfane height h1 mm 780
Press overall height h2 mm 1935 1980
Position of anchor bolt (a4xb4) mm 650 × 920
Floor space required (a5xb5) mm 740 × 1070
Max. measurement of press (a6xb6) mm 905× 1280
Nominal working energy kg-m 65
Main motor Hp x p 3 × 4
Required air pressure kg/c㎡ 5
Approx. machine weight mt 2
SC1-35
Model (S) (1) (2)
Capacity ton 35
Tonnage rating point (above B.D.C.) mm 2.3 2.6
Stroke length mm 50 80 110
Stroke per minute Standard spm 90 100
Variable 90 ~ 200 70 ~ 130 60 ~ 110
Allowable intermittent spm 48 65
Die height, slide to bolster mm 220 250
Slide adjustment mm 55
Slide area (a1xb1) mm 400 × 300
Bolster area (a2xb3) mm 780 × 400
Bolster thickness mm 100
Frame gap (b3xh3) mm 210
Frame inside measurement a3 mm 480
Bolster surfane height h1 mm 800
Press overall height h2 mm 2135 2180
Position of anchor bolt (a4xb4) mm

730 × 1000

Floor space required (a5xb5) mm 830 × 1170
Max. measurement of press (a6xb6) mm 990× 1380
Nominal working energy kg-m 91
Main motor Hp x p 5 × 4
Required air pressure kg/c㎡ 5
Approx. machine weight mt 2.8
SC1-45
Model (S) (1) (2)
Capacity ton 45
Tonnage rating point (above B.D.C.) mm 2.3 3.2
Stroke length mm 50 80 120
Stroke per minute Standard spm 80 100 80
Variable 85 ~ 180 60 ~ 105 50 ~ 95
Allowable intermittent spm 49 51 58
Die height, slide to bolster mm 250 270
Slide adjustment mm 60
Slide area (a1xb1) mm 430 × 340
Bolster area (a2xb3) mm 830 × 440
Bolster thickness mm 110
Frame gap (b3xh3) mm 230
Frame inside measurement a3 mm 520
Bolster surfane height h1 mm 800
Press overall height h2 mm 2260 2300
Position of anchor bolt (a4xb4) mm

750 × 1100

Floor space required (a5xb5) mm 830 × 1260
Max. measurement of press (a6xb6) mm 1010× 1470
Nominal working energy kg-m 144
Main motor Hp x p 5 × 4
Required air pressure kg/c㎡ 5
Approx. machine weight mt 3.8
SC1-60
Model (S) (1) (2)
Capacity ton 60
Tonnage rating point (above B.D.C.) mm 2.3 4
Stroke length mm 55 90 140
Stroke per minute Standard spm 70 90 70
Variable 80 ~ 165 55 ~ 100 45 ~ 85
Allowable intermittent spm 50 45 50
Die height, slide to bolster mm 270 300
Slide adjustment mm 70
Slide area (a1xb1) mm 480 × 400
Bolster area (a2xb3) mm 900 × 520
Bolster thickness mm 130
Frame gap (b3xh3) mm 270
Frame inside measurement a3 mm 580
Bolster surfane height h1 mm 900
Press overall height h2 mm 2520 2575
Position of anchor bolt (a4xb4) mm

860 × 1135

Floor space required (a5xb5) mm 960 × 1400
Max. measurement of press (a6xb6) mm 1110× 1610
Nominal working energy kg-m 240
Main motor Hp x p 7.5 × 4
Required air pressure kg/c㎡ 5
Approx. machine weight mt 6
SC1-80
Model (S) (1) (2)
Capacity ton 80
Tonnage rating point (above B.D.C.) mm 3.2 5
Stroke length mm 60 100 160
Stroke per minute Standard spm - - 60
Variable 75 ~ 150 50 ~ 110 40 ~ 75
Allowable intermittent spm 60 53 60
Die height, slide to bolster mm 300 320
Slide adjustment mm 80
Slide area (a1xb1) mm 540 × 460
Bolster area (a2xb3) mm 980 × 600
Bolster thickness mm 140
Frame gap (b2) mm 310
Frame inside measurement a3 mm 640
Bolster surfane height h1 mm 900
Press overall height h2 mm 2685 2735
Position of anchor bolt (a4xb4) mm

920 × 1310

Floor space required (a5xb5) mm 1040 × 1550
Nominal working energy kg-m 400
Main motor Hp x p 10 × 4
Required air pressure kg/c㎡ 5
Approx. machine weight mt 8
SC1-110
Model (S) (1) (2)
Capacity ton 110
Tonnage rating point (above B.D.C.) mm 3.2 5
Stroke length mm 70 110 180
Stroke per minute Standard spm - - 50
Variable 65 ~ 135 45 ~ 100 35 ~ 65
Allowable intermittent spm 50 48 50
Die height, slide to bolster mm 320 350
Slide adjustment mm 90
Slide area (a1xb1) mm 625 × 520
Bolster area (a2xb3) mm 1170 × 680
Bolster thickness mm 150
Frame gap (b2) mm 350
Frame inside measurement a3 mm 670
Bolster surfane height h1 mm 900
Press overall height h2 mm 2885 2950
Position of anchor bolt (a4xb4) mm

1040 × 1510

Floor space required (a5xb5) mm 1140 × 1760
Nominal working energy kg-m 550
Main motor Hp x p 15 × 4
Required air pressure kg/c㎡ 5
Approx. machine weight mt 11
SC1-160
Model (S) (1) (2)
Capacity ton 160
Tonnage rating point (above B.D.C.) mm 4 6
Stroke length mm 80 130 200
Stroke per minute Standard spm - - 45
Variable 55 ~ 115 40 ~ 85 30 ~ 55
Allowable intermittent spm 23 29 38
Die height, slide to bolster mm 350 400
Slide adjustment mm 100
Slide area (a1xb1) mm 700 × 580
Bolster area (a2xb3) mm 1220 × 760
Bolster thickness mm 165
Frame gap (b2) mm 390
Frame inside measurement a3 mm 740
Bolster surfane height h1 mm 900
Press overall height h2 mm 3115 3200
Position of anchor bolt (a4xb4) mm

1140 × 1790

Floor space required (a5xb5) mm 1240 × 2030
Nominal working energy kg-m 960
Main motor Hp x p 20 × 4
Required air pressure kg/c㎡ 5
Approx. machine weight mt 16
SC1-200
Model (S) (1) (2)
Capacity ton 200
Tonnage rating point (above B.D.C.) mm 4 6
Stroke length mm 95 160 250
Stroke per minute Standard spm - - 35
Variable 45 ~ 95 30 ~ 70 25 ~ 45
Allowable intermittent spm 39 37 35
Die height, slide to bolster mm 410 450
Slide adjustment mm 110
Slide area (a1xb1) mm 880 × 650
Bolster area (a2xb3) mm 1440 × 840
Bolster thickness mm 180
Frame gap (b2) mm 430
Frame inside measurement a3 mm 940
Bolster surfane height h1 mm 1000
Press overall height h2 mm 3605 3690
Position of anchor bolt (a4xb4) mm

1360 × 2020

Floor space required (a5xb5) mm 1460 × 2290
Nominal working energy kg-m 1200
Main motor Hp x p 25 × 4
Required air pressure kg/c㎡ 5
Approx. machine weight mt 23
SC1-250
Model (1) (2)
Capacity ton 250
Tonnage rating point (above B.D.C.) mm 7
Stroke length mm 170 280
Stroke per minute Standard spm - 25
Variable 25 ~ 45 20 ~ 35
Allowable intermittent spm 32 28
Die height, slide to bolster mm 450 550
Slide adjustment mm 120
Slide area (a1xb1) mm 950 × 720
Bolster area (a2xb3) mm 1550 × 920
Bolster thickness mm 190
Frame gap (b2) mm 470
Frame inside measurement a3 mm 980
Bolster surfane height h1 mm 1100
Press overall height h2 mm 4015 4170
Position of anchor bolt (a4xb4) mm

1440 × 2000

Floor space required (a5xb5) mm 1560 × 2400
Nominal working energy kg-m 1400
Main motor Hp x p 30 × 4
Required air pressure kg/c㎡ 5
Approx. machine weight mt 30
If you can’t find intended products here,
please call us,
and we are happy to help you.